Thanh Profile=thép, mạ niken 8mm/200cm

Mã sản phẩm 226.67.205

  • Drehstangen-Schloss-System Piccolo-Nova

     

    für geteilte Profilstangen Durchmesser 6 mm

    Das Drehstangen-System Piccolo-Nova mit schmalem Schlosskasten ist eine vielfach erprobte Lösung für jede Einbausituation. Es umfasst Schlösser mit Zuhaltungen, Plättchen- und Stiftzylindern sowie Vierkantnuss und/oder Schlossrosette zur Kombination mit Aufbausystemen.

    Die beiden erhältlichen Dornmaße 15 mm und 25 mm ermöglichen bei Eck- und Reihenschränken bei gleichem Bohrbild ein identisches Fugenmaß.

     
     
     

    Beispiel: Maße bei 19 mm Holzdicke und 3 mm Fuge (die farbigen Maße dürfen nicht verändert werden)

    Übersicht über das Drehstangen-Schloss-System Piccolo-Nova

     
  • Drehstangen‐Schloss‐System Standard‐Nova

    für geteilte Profilstangen Durchmesser 8 mm

    Das Drehstangen‐System Standard‐Nova mit breitem Schlosskasten ist eine bewährte Standard‐Lösung für jede Einbausituation. Es umfasst Schlösser mit Plättchen‐ und Stiftzylindern sowie Vierkantnuss und/oder Schlossrosette zur Kombination mit Aufbausystemen.

    Übersicht über das Drehstangen‐Schloss‐System Standard‐Nova

     
  • Symo is a modular cylinder core system from Häfele. Without tools and time-consuming installation, it provides maximum flexibility at minimum costs and effort.

     

    Due to the variety of components within the Symo system, all present and future applications can be covered – and all this with maximum freedom during planning and execution.

     

    All components of the Symo system can be combined as required and exchanged, modified or upgraded at any time.

     

    Locking plans can be modified easily, quickly and economically. Only the cylinder core is replaced (without tools), the lock - and therefore the piece of furniture - remains untouched.

    Rational furniture production

    Since the lock and the cylinder core are separated, the locks can be pre-mounted in the furniture and are fully functional through their protective caps. The protective caps can be replaced easily and without tools by the required cylinder core at any time. The furniture can therefore be produced independently from its future use and from the required locking plans, and can be equipped with the required locks. This allows rational mass-production. The individual locks can be integrated into the locking plan by inserting the cylinder cores at any time, even after the furniture has been set up.

    Inserting and removing cylinder cores without tools

    No tools are required for inserting and removing the cylinder cores, which can also be done at any time after the locks have been installed. The cylinder cores can only be inserted or removed with the lock in open position. The cylinder can be removed using a removal key.

    Maintain the cylinder cores every 6 month, but do not treat the cylinder cores with graphite!

    Flexibility and economic efficiency – at any time

    Previously, removals, changed locking plans and security requirements as well as lost keys were the weak points of every locking plan which always required time-consuming and costly modification measures. Symo provides maximum flexibility even years after completion. Simply replace the cylinder cores to adapt the furniture locking concept to changed requirements. No tools are required and the installation is fast and simple. Whatever the requirements are: Symo is prepared.

     

    Plate cylinder or pin tumbler cylinder?

    With the Symo locking system you can choose between plate cylinders and pin tumbler cylinders.

     
     
     
     
     
    UniversalUniversal Objekt
     
     
     
     
     
     
     
     
     
     
     
     
     
     

    Premium 5

    Premium 20

    One protective cap, several functions !

     

     
     

    The protective caps for the Symo locks not only protect the interior of the cylinder housing against dirt or damages during the construction phase, but also function as temporary construction keys that can be operated with a coin or screwdriver due to their design. After construction is completed, the protective caps can be removed easily without tools and replaced by the required cylinder cores.

    Mã sản phẩm 226.67.205

    Mã sản phẩm 226.67.205
    Hỗ trợ

    Hỗ trợ

    Còn đủ số lượng hàng yêu cầu.
    Số lượng hàng có hạn.
    Hết hàng.

    Lưu ý:
    Để nhận được hàng sớm vui lòng chọn 'Ngay khi có hàng' tại trang thanh toán.

    Cái Tối thiểu 1
    See Required Products
    Chi tiết sản phẩm

    Chất liệu

    Thép
    19/06/2019

    Thanh Profile=thép, mạ niken 8mm/200cm

    • Ø 8 mm

    Lưu ý: Hình ảnh có thể là của một sản phẩm tương tự

    Lưu ý

    Hãy chọn một sản phẩm trong giấy ghi nhớ hoặc trong danh mục sản phẩm, rồi cho nó vào giỏ hàng.