Set components, Slido Fold 55-S, set components

Folding and sliding door fitting for 2 to 6 leaf glass folding sliding doors, clamped door leaf connection, door weights up to 55 kg, door heights up to 2500 mm

  • Slido – Sliding door fittings from Häfele

    Häfele supplies sliding door fittings for any application under the Slido brand.

    These fittings are particularly outstanding because of the wide range of different combination options.

     
     
    • Slido sliding door systems are available for wall mounting or ceiling installation
    • There are many different facing options for Slido sliding door systems
    • Slido sliding door systems can be used for door weights from 40 to 240 kg
    • Slido sliding door systems are also available with electric drive

    Sliding door applications

    Fittings for wooden sliding doors
    • Space-saving room elements block the view of the areas behind them
    • Combination with coloured surfaces
    • Modern room design

    Variants:

    Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered

    Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room

     
     
    Fittings for glass sliding doors
    • Space-saving room elements
    • Brightness and transparency in the rooms
    • Modern room design using coloured or textured glass
    • Combination with fixed glass panel elements

    Variants:

    Classic – with these fittings the moving parts and the suspension fittings of the sliding door are hidden and covered

    Design – with these fittings the moving parts and the suspension fittings of the sliding door are visible, and can therefore be used as a design feature in the room

     
     
    Fittings for folding walls
    • Space-saving room elements
    • Room division
    • Large passageways can be partitioned off
    • Space-saving, folded door stack when open

    Variant:

    Fold – these fittings are suitable for creating folding walls

     
     

    Soft closing systems from Häfele

    Häfele supplies a full range of soft closing mechanisms for hinged doors, flaps and also for sliding doors.

    Their ease of installation is truly impressive, and also have the following advantages when they are being used:

    • Noise reduction
    • Lower accident risk
    • Increased operating convenience
    • Material-friendly
    • Sliding doors that close gently and quietly increase comfort in the living and working environments.
     
     
  • Fittings for folding walls

    Folding walls are used to subdivide rooms. Pushing a folding wall to one side and stacking the doors provide unrestricted access.

    Suspension at the side of the door

    The doors are connected to each other with hinges. The doors can be stacked at the right and/or the left hand side.

    In the open position, the doors are at an angle of 90° to the closed wall below the running track. If the suspension point is in the centre of the door width, a bottom guide is not necessary, if the system is operated carefully. The suspension point can be at the side edge, near the side edge or in the centre of the door, depending on the fitting.

    Suspension at the side edge

    Suspension near the side edge

    Suspension in the centre of the door

  • Instructions available.
    Please select an article.
  • Catalog links available.
    Please select an article to view.
Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available.

Note:
To receive items as fast as possible, choose 'When available' at checkout.

NONE Min. 1
See Required Products

946.49.053 Bott.outs.hinge alu.silvc.

For left and right hand use, for flush fit socket

946.49.074 Folding hinge alu.silvc.

Without leaf locking device

946.49.075 Bott.fold.hinge alu.silvc.

With leaf locking device

946.49.077 Fold.hinge alu.silvc.fl.guide

With floor guide, for guide track

Product details

Area of application

For 2-leaf to 6-leaf folding walls
max. system width 4,800 mm

Suitable for

Tempered safety glass

Installation

Suspension by positive-fit glass clamp connection, drill hole in glass required

For glass thickness

Tempered safety glass: 8 – 10 mm mm

Door weight

≤55 kg

Door width

<800 mm mm

Door height

<2,500 mm mm

Adjustment facility

Height +4/–6 mm

Material

Aluminium

Finish

Silver coloured anodized
Product Features

Order reference

Catalogue numbers apply to 1 piece. Please specify required quantity when ordering individual components.

Catch is required. Please order separately.

 
 
 
 
 

Number of door leaves

ⓐ 946.49.053

ⓑ 946.49.055

ⓒ 946.49.077

ⓓ 946.49.078

ⓔ 946.49.074

ⓕ 946.49.075

ⓘ 946.49.061

2-leaf

2 pieces

2 pieces

1 piece

1 piece

1 piece

3-leaf

1 piece

1 piece

1 piece

1 piece

1 piece

1 piece

1 piece

4-leaf

2 pieces

2 pieces

1 piece

1 piece

2 pieces

2 pieces

1 piece

5-leaf

1 piece

1 piece

2 pieces

2 pieces

2 pieces

2 pieces

1 piece

6-leaf

2 pieces

2 pieces

2 pieces

2 pieces

3 pieces

3 pieces

1 piece

Required products

Folding door hinge, bottom


NONE
This product has 1 required products

Guide rail, Bottom

Art no.
Finish/colour
Length