- Opening angle and braking effect can be adjusted
- With soft and self closing mechanisms
- No time-consuming cabinet processing required
- For horizontal or vertical installation (extremely little space requirement inside the cabinet)
- Lift mechanism suitable for left or right hand use
Fitting and cover caps: Plastic, front fixing brackets: Zinc alloy
Fitting: Grey, front fixing brackets: Nickel plated, cover caps: Matt silver coloured, shiny silver coloured, black, white or anthracite
Housing 89 x 23 x 163 (W x H x L) when installed horizontally
Min. 196 mm (horizontally), min. 110 mm (vertically)
For screw fixing with Euro screws
Opening and closing force, opening angle
Show more information
Planning and installation | | | | | | |
Horizontal installation | | Vertical installation | | Front fixing |
 | |  | |  | |  |
| | | | | | |
| U | V | W | X | | 200–330 | 194 | 102 | 137 + Z | | 330–430 | 218 | 126 | 161 + Z | | 430–480 | 228 | 136 | 171 + Z |
| | | | Y = lateral flap overlay dimension Z = bottom flap overlay dimension |
Adjustment | | |
 | | (1) | Opening angle adjustment | (2) | Opening speed adjustment |
|
|
|
| | |
Note Lower flap weight during adjustment. |
Planning and installation | | | | | | |
Horizontal installation | | Vertical installation | | Front fixing |
| | | | | | |
| | | | | | |
| U | V | W | X | | 200–330 | 194 | 102 | 137 + Z | | 330–430 | 218 | 126 | 161 + Z | | 430–480 | 228 | 136 | 171 + Z |
| | | | Y = lateral flap overlay dimension Z = bottom flap overlay dimension |
Adjustment | | |
| | (1) | Opening angle adjustment | (2) | Opening speed adjustment |
|
|
|
| | |
Note Lower flap weight during adjustment. |
Sample measurements table for selecting the right model
Horizontal installation
Flap height mm | Flap hinge | Concealed hinge |
|---|
Flap weight kg | Model* | Flap weight kg | Model* |
|---|
A | B | C | D | E | F | A | B | C | D | E | F |
|---|
* The specified number refers to the number of required flap stays with pull cable. |
|---|
| 200–230 | 2.4–2.8 | 1 | – | – | – | – | – | 2–2.8 | 1 | – | – | – | – | – |
| 4–4.8 | – | 1 | – | – | – | – | 3.5–4.8 | – | 1 | – | – | – | – |
| 4.2–6.2 | – | – | 1 | – | – | – | 4.3–5.8 | – | – | 1 | – | – | – |
| 4.8–6.8 | – | – | – | 1 | – | – | 4.9–6.9 | – | – | – | 1 | – | – |
| 5.8–8 | – | – | – | – | 1 | – | 5.9–7.8 | – | – | – | – | 1 | – |
| 7.2–10.4 | – | – | – | – | – | 1 | 7.6–10 | – | – | – | – | – | 1 |
| 230–270 | 2–2.3 | 1 | – | – | – | – | – | 2–2.4 | 1 | – | – | – | – | – |
| 3–4.4 | – | 1 | – | – | – | – | 3–3.6 | 2 | – | – | – | – | – |
| 3.2–4.4 | 2 | – | – | – | – | – | 3.2–4 | – | 1 | – | – | – | – |
| 3.6–5.2 | – | – | 1 | – | – | – | 3.7–5.6 | – | – | 1 | – | – | – |
| 4.4–6 | – | – | – | 1 | – | – | 4.4–6.2 | – | – | – | 1 | – | – |
| 5.2–7 | – | – | – | – | 1 | – | 6–7.6 | – | – | – | – | 1 | – |
| 6–8.4 | – | 2 | – | – | – | – | 6.8–8.5 | – | 2 | – | – | – | – |
| 6.8–8.6 | – | – | – | – | – | 1 | 6.8–9.2 | – | – | 2 | – | – | – |
| 6.8–9.6 | – | – | 2 | – | – | – | 7–9 | – | – | – | – | – | 1 |
| 270–330 | 1.4–2 | 1 | – | – | – | – | – | 1.7–2.1 | 1 | – | – | – | – | – |
| 2.9–3.8 | 2 | 1 | – | – | – | – | 3.1–3.9 | – | 1 | – | – | – | – |
| 3–4.6 | – | – | 1 | – | – | – | 3.2–3.8 | 2 | – | – | – | – | – |
| 3.6–5.2 | – | – | – | 1 | – | – | 3.8–5 | – | – | 1 | – | – | – |
| 4.6–6 | – | – | – | – | 1 | – | 4–5.2 | – | – | – | 1 | – | – |
| 5.6–7.8 | – | 2 | – | – | – | – | 4.7–7.3 | – | – | – | – | 1 | – |
| 6.4–7.8 | – | – | – | – | – | 1 | 5.4–7.4 | – | 2 | – | – | – | – |
| 6.4–8.8 | – | – | 2 | – | – | – | 5.6–7.6 | – | – | – | – | – | 1 |
| 7–10.2 | – | – | – | 2 | – | – | 7.4–9 | – | – | 2 | – | – | – |
| 8.6–11.8 | – | – | – | – | 2 | – | 8.6–11 | – | – | – | 2 | – | – |
| | | | | | | 10.6–12.6 | – | – | – | – | 2 | – |
| 330–380 | 2.7–3.7 | – | 1 | – | – | – | – | 2.6–3.6 | – | 1 | – | – | – | – |
| 3.2–4.3 | – | – | 1 | – | – | – | 3.7–5.1 | – | – | – | 1 | – | – |
| 3.7–4.9 | – | – | – | 1 | – | – | 3.9–4.9 | – | – | 1 | – | – | – |
| 4.3–5.7 | – | – | – | – | 1 | – | 4.4–5.5 | – | – | – | – | 1 | – |
| 5–7 | – | 2 | – | – | – | – | 5–7.2 | – | 2 | – | – | – | – |
| 5.5–7.1 | – | – | – | – | – | 1 | 5.4–6.7 | – | – | – | – | – | 1 |
| 6.5–8.5 | – | – | 2 | – | – | – | 7.2–8.8 | – | – | 2 | – | – | – |
| 6.9–10.1 | – | – | – | 2 | – | – | 8–11.2 | – | – | – | 2 | – | – |
| 8.7–11.1 | – | – | – | – | 2 | – | 9.6–12.4 | – | – | – | – | 2 | – |
| 11.9–13.5 | – | – | – | – | – | 2 | 12.8–14 | – | – | – | – | – | 2 |
| 380–430 | 2.9–3.6 | – | 1 | – | – | – | – | 2.8–3.7 | – | 1 | – | – | – | – |
| 3.1–3.9 | – | – | 1 | – | – | – | 2.9–3.9 | – | – | 1 | – | – | – |
| 3.7–4.5 | – | – | – | 1 | – | – | 3.3–4.5 | – | – | – | 1 | – | – |
| 4.5–6.1 | – | – | – | – | 1 | – | 3.9–5.2 | – | – | – | – | 1 | – |
| 4.5–6.1 | – | 2 | – | – | – | – | 4.5–7 | – | 2 | – | – | – | – |
| 5.4–6.9 | – | – | – | – | – | 1 | 4.9–6.1 | – | – | – | – | – | 1 |
| 5.7–7.3 | – | – | 2 | – | – | – | 6.1–8.7 | – | – | 2 | – | – | – |
| 6.9–8 | – | – | – | 2 | – | – | 7.5–11 | – | – | – | 2 | – | – |
| 8.5–10.1 | – | – | – | – | 2 | – | 8.4–12.2 | – | – | – | – | 2 | – |
| 10.9–12.5 | – | – | – | – | – | 2 | 12–14.5 | – | – | – | – | – | 2 |
| 430–460 | 2.7–3.1 | – | 1 | – | – | – | – | 2.2–3 | – | 1 | – | – | – | – |
| 2.7–3.9 | – | – | 1 | – | – | – | 2.9–3.7 | – | – | 1 | – | – | – |
| 3.7–4.7 | – | – | – | 1 | – | – | 3.3–4.5 | – | – | – | 1 | – | – |
| 4.1–4.9 | – | – | – | – | 1 | – | 3.7–4.9 | – | – | – | – | 1 | – |
| 4.3–6.1 | – | 2 | – | – | – | – | 4.3–6.3 | – | 2 | – | – | – | – |
| 5.3–5.7 | – | – | – | – | – | 1 | 4.9–5.7 | – | – | – | – | – | 1 |
| 5.9–8.3 | – | – | 2 | – | – | – | 5.9–8.3 | – | – | 2 | – | – | – |
| 7.1–8.5 | – | – | – | 2 | – | – | 7.5–10.5 | – | – | – | 2 | – | – |
| 8.3–9.5 | – | – | – | – | 2 | – | 8.5–11 | – | – | – | – | 2 | – |
| 10.1–11.5 | – | – | – | – | – | 2 | 10.5–12.5 | – | – | – | – | – | 2 |
| 460–480 | 2.5–2.9 | – | 1 | – | – | – | – | 2.8–3 | – | 1 | – | – | – | – |
| 2.8–3.8 | – | – | 1 | – | – | – | 2.9–3.7 | – | – | 1 | – | – | – |
| 3.6–4.4 | – | – | – | 1 | – | – | 3.4–4.1 | – | – | – | 1 | – | – |
| 3.8–4.8 | – | – | – | – | 1 | – | 3.7–4.5 | – | – | – | – | 1 | – |
| 4.1–5.7 | – | 2 | – | – | – | – | 4.1–6.1 | – | 2 | – | – | – | – |
| 5.3–7.7 | – | – | 2 | – | – | – | 4.7–5.5 | – | – | – | – | – | 1 |
| 5.4–5.6 | – | – | – | – | – | 1 | 5.5–7.5 | – | – | 2 | – | – | – |
| 6.8–8.9 | – | – | – | 2 | – | – | 7–9.5 | – | – | – | 2 | – | – |
| 7.2–9.6 | – | – | – | – | 2 | – | 9–10 | – | – | – | – | 2 | – |
| 9.8–11.4 | – | – | – | – | – | 2 | 11–12 | – | – | – | – | – | 2 |
Application for front panels without handles (Tip-On solution)
The fitting is suitable for use with front panels without handles with one or two push catches. |
| | |
 |
Number of push catches |
X mm |  |  | For mounting in drilled hole | For screw fixing | | < 800 | 1 piece | 1 piece | | > 800 | 2 pieces | 2 pieces |
|
Position of the push catch |
| | |
 | |  |
Vertical installation
Flap height mm | Flap hinge | Concealed hinge |
|---|
Flap weight kg | Model* | Flap weight kg | Model* |
|---|
A | B | C | D | E | F | A | B | C | D | E | F |
|---|
* The specified number refers to the number of required flap stays with pull cable. |
|---|
| 200–230 | 2.5–2.9 | 1 | – | – | – | – | – | 2.6–3.1 | 1 | – | – | – | – | – |
| 4.1–5.9 | – | 1 | – | – | – | – | 4.4–5.5 | – | 1 | – | – | – | – |
| 5.3–7.3 | – | – | 1 | – | – | – | 6.3–8.5 | – | – | 1 | – | – | – |
| 8–11 | – | – | – | 1 | – | – | 7.5–9.3 | – | – | – | 1 | – | – |
| 230–270 | 2.2–2.5 | 1 | – | – | – | – | – | 2.1–2.5 | 1 | – | – | – | – | – |
| 3.3–4.8 | – | 1 | – | – | – | – | 3.4–4.5 | – | 1 | – | – | – | – |
| 4.1–4.8 | 2 | – | – | – | – | – | 4–4.8 | 2 | – | – | – | – | – |
| 4.2–6 | – | – | 1 | – | – | – | 4.5–5.6 | – | – | 1 | – | – | – |
| 6.6–8.6 | – | – | – | 1 | – | – | 6.8–8.6 | – | – | – | 1 | – | – |
| 6.8–9.6 | – | 2 | – | – | – | – | 6.8–9.2 | – | 2 | – | – | – | – |
| 9.6–12.8 | – | – | 2 | – | – | – | 9.2–12 | – | – | 2 | – | – | – |
| 270–330 | 1.9–2.3 | 1 | – | – | – | – | – | 2–2.3 | 1 | – | – | – | – | – |
| 3.2–4.5 | – | 1 | – | – | – | – | 3–4.9 | – | 1 | – | – | – | – |
| 3.4–4.3 | 2 | – | – | – | – | – | 3.5–4.5 | 2 | – | – | – | – | – |
| 3.8–5.1 | – | – | 1 | – | – | – | 3.7–5.1 | – | – | 1 | – | – | – |
| 5.7–7.3 | – | – | – | 1 | – | – | 5.4–7.1 | – | – | – | 1 | – | – |
| 6.1–8 | – | – | – | – | 1 | – | 6.1–7.3 | – | – | – | – | 1 | – |
| 6.3–8.1 | – | 2 | – | – | – | – | 6.1–7.7 | – | 2 | – | – | – | – |
| 7.9–11.1 | – | – | 2 | – | – | – | 7.7–10.1 | – | – | 2 | – | – | – |
| 11.3–14.5 | – | – | – | 2 | – | – | 10.5–13.7 | – | – | – | 2 | – | – |
| 12.9–15.5 | – | – | – | – | 2 | – | 12.1–14.5 | – | – | – | – | 2 | – |
| 330–380 | 2.6–3.4 | – | 1 | – | – | – | – | 2.5–3.6 | – | 1 | – | – | – | – |
| 3.3–4.5 | – | – | 1 | – | – | – | 3.2–4.3 | – | – | 1 | – | – | – |
| 4.9–6.3 | – | – | – | 1 | – | – | 4.6–6.1 | – | – | – | 1 | – | – |
| 5–6.5 | – | 2 | – | – | – | – | 4.9–6.4 | – | – | – | – | 1 | – |
| 5.3–6.5 | – | – | – | – | 1 | – | 5.1–6.9 | – | 2 | – | – | – | – |
| 6.7–7.3 | – | – | – | – | – | 1 | 6.3–7.3 | – | – | – | – | – | 1 |
| 7.3–8.5 | – | – | 2 | – | – | – | 6.6–9.3 | – | – | 2 | – | – | – |
| 9.7–11.7 | – | – | – | 2 | – | – | 9.1–11.3 | – | – | – | 2 | – | – |
| 10.7–12.9 | – | – | – | – | 2 | – | 10.5–12.9 | – | – | – | – | 2 | – |
| 13.3–14.9 | – | – | – | – | – | 2 | 12.5–14.5 | – | – | – | – | – | 2 |
| 380–430 | 2.5–3.4 | – | 1 | – | – | – | – | 2.3–3.2 | – | 1 | – | – | – | – |
| 3.2–4.2 | – | – | 1 | – | – | – | 3–4 | – | – | 1 | – | – | – |
| 4.4–5.4 | – | – | – | 1 | – | – | 4.4–5.4 | – | – | – | 1 | – | – |
| 4.8–5.6 | – | – | – | – | 1 | – | 4.4–6.6 | – | 2 | – | – | – | – |
| 5–6.2 | – | 2 | – | – | – | – | 4.6–5.6 | – | – | – | – | 1 | – |
| 5.9–6.6 | – | – | – | – | – | 1 | 5.5–6.4 | – | – | – | – | – | 1 |
| 6.2–8.2 | – | – | 2 | – | – | – | 6.6–8.2 | – | – | 2 | – | – | – |
| 8.6–10.6 | – | – | – | 2 | – | – | 8.4–10.2 | – | – | – | 2 | – | – |
| 9.8–11.4 | – | – | – | – | 2 | – | 9.4–11.4 | – | – | – | – | 2 | – |
| 11.8–13 | – | – | – | – | – | 2 | 11–3 | – | – | – | – | – | 2 |
| 430–460 | 2.3–3 | – | 1 | – | – | – | – | 2.3–3 | – | 1 | – | – | – | – |
| 3–3.8 | – | – | 1 | – | – | – | 2.8–3.6 | – | – | 1 | – | – | – |
| 4–5.2 | – | – | – | 1 | – | – | 4.2–5.2 | – | – | – | 1 | – | – |
| 4.6–5.4 | – | – | – | – | 1 | – | 4.2–6.2 | – | 2 | – | – | – | – |
| 4.6–6.2 | – | 2 | – | – | – | – | 4.4–5.4 | – | – | – | – | 1 | – |
| 5.6–6 | – | – | – | – | – | 1 | 5.2–6 | – | – | – | – | – | 1 |
| 6.2–7.8 | – | – | 2 | – | – | – | 5.4–7.6 | – | – | 2 | – | – | – |
| 7.8–10.2 | – | – | – | 2 | – | – | 7.4–9.4 | – | – | – | 2 | – | – |
| 9–10.4 | – | – | – | – | 2 | – | 8.4–10.6 | – | – | – | – | 2 | – |
| 11.4–12.2 | – | – | – | – | – | 2 | 10.6–12.2 | – | – | – | – | – | 2 |
| 460–480 | 2.4–3.2 | – | 1 | – | – | – | – | 2.3–3 | – | 1 | – | – | – | – |
| 2.8–4 | – | – | 1 | – | – | – | 2.8–3.6 | – | – | 1 | – | – | – |
| 3.8–5 | – | – | – | 1 | – | – | 4–5.2 | – | – | – | 1 | – | – |
| 4.5–5.4 | – | – | – | – | 1 | – | 4.2–6.2 | – | 2 | – | – | – | – |
| 4.6–6 | – | 2 | – | – | – | – | 4.4–5.4 | – | – | – | – | 1 | – |
| 5.4–6 | – | – | – | – | – | 1 | 5.2–6 | – | – | – | – | – | 1 |
| 5.6–7.8 | – | – | 2 | – | – | – | 5.4–7.6 | – | – | 2 | – | – | – |
| 7.6–10 | – | – | – | 2 | – | – | 7.2–9.4 | – | – | – | 2 | – | – |
| 8.8–10.4 | – | – | – | – | 2 | – | 8.4–10.6 | – | – | – | – | 2 | – |
| 10.8–11.6 | – | – | – | – | – | 2 | 10.4–11.6 | – | – | – | – | – | 2 |
Application for front panels without handles (Tip-On solution)
The fitting is suitable for use with front panels without handles with one or two push catches. |
| | |
|
Number of push catches |
X mm | | | For mounting in drilled hole | For screw fixing | | > 800 | 2 pieces | 2 pieces |
|
Position of the push catch |
| | |
| | |
Sample measurements table for selecting the right model
Horizontal installation
Flap height mm | Flap hinge | Concealed hinge |
|---|
Flap weight kg | Model* | Flap weight kg | Model* |
|---|
A | B | C | D | E | F | A | B | C | D | E | F |
|---|
* The specified number refers to the number of required flap stays with pull cable. |
|---|
| 200–230 | 2.4–2.8 | 1 | – | – | – | – | – | 2–2.8 | 1 | – | – | – | – | – |
| 4–4.8 | – | 1 | – | – | – | – | 3.5–4.8 | – | 1 | – | – | – | – |
| 4.2–6.2 | – | – | 1 | – | – | – | 4.3–5.8 | – | – | 1 | – | – | – |
| 4.8–6.8 | – | – | – | 1 | – | – | 4.9–6.9 | – | – | – | 1 | – | – |
| 5.8–8 | – | – | – | – | 1 | – | 5.9–7.8 | – | – | – | – | 1 | – |
| 7.2–10.4 | – | – | – | – | – | 1 | 7.6–10 | – | – | – | – | – | 1 |
| 230–270 | 2–2.3 | 1 | – | – | – | – | – | 2–2.4 | 1 | – | – | – | – | – |
| 3–4.4 | – | 1 | – | – | – | – | 3–3.6 | 2 | – | – | – | – | – |
| 3.2–4.4 | 2 | – | – | – | – | – | 3.2–4 | – | 1 | – | – | – | – |
| 3.6–5.2 | – | – | 1 | – | – | – | 3.7–5.6 | – | – | 1 | – | – | – |
| 4.4–6 | – | – | – | 1 | – | – | 4.4–6.2 | – | – | – | 1 | – | – |
| 5.2–7 | – | – | – | – | 1 | – | 6–7.6 | – | – | – | – | 1 | – |
| 6–8.4 | – | 2 | – | – | – | – | 6.8–8.5 | – | 2 | – | – | – | – |
| 6.8–8.6 | – | – | – | – | – | 1 | 6.8–9.2 | – | – | 2 | – | – | – |
| 6.8–9.6 | – | – | 2 | – | – | – | 7–9 | – | – | – | – | – | 1 |
| 270–330 | 1.4–2 | 1 | – | – | – | – | – | 1.7–2.1 | 1 | – | – | – | – | – |
| 2.9–3.8 | 2 | 1 | – | – | – | – | 3.1–3.9 | – | 1 | – | – | – | – |
| 3–4.6 | – | – | 1 | – | – | – | 3.2–3.8 | 2 | – | – | – | – | – |
| 3.6–5.2 | – | – | – | 1 | – | – | 3.8–5 | – | – | 1 | – | – | – |
| 4.6–6 | – | – | – | – | 1 | – | 4–5.2 | – | – | – | 1 | – | – |
| 5.6–7.8 | – | 2 | – | – | – | – | 4.7–7.3 | – | – | – | – | 1 | – |
| 6.4–7.8 | – | – | – | – | – | 1 | 5.4–7.4 | – | 2 | – | – | – | – |
| 6.4–8.8 | – | – | 2 | – | – | – | 5.6–7.6 | – | – | – | – | – | 1 |
| 7–10.2 | – | – | – | 2 | – | – | 7.4–9 | – | – | 2 | – | – | – |
| 8.6–11.8 | – | – | – | – | 2 | – | 8.6–11 | – | – | – | 2 | – | – |
| | | | | | | 10.6–12.6 | – | – | – | – | 2 | – |
| 330–380 | 2.7–3.7 | – | 1 | – | – | – | – | 2.6–3.6 | – | 1 | – | – | – | – |
| 3.2–4.3 | – | – | 1 | – | – | – | 3.7–5.1 | – | – | – | 1 | – | – |
| 3.7–4.9 | – | – | – | 1 | – | – | 3.9–4.9 | – | – | 1 | – | – | – |
| 4.3–5.7 | – | – | – | – | 1 | – | 4.4–5.5 | – | – | – | – | 1 | – |
| 5–7 | – | 2 | – | – | – | – | 5–7.2 | – | 2 | – | – | – | – |
| 5.5–7.1 | – | – | – | – | – | 1 | 5.4–6.7 | – | – | – | – | – | 1 |
| 6.5–8.5 | – | – | 2 | – | – | – | 7.2–8.8 | – | – | 2 | – | – | – |
| 6.9–10.1 | – | – | – | 2 | – | – | 8–11.2 | – | – | – | 2 | – | – |
| 8.7–11.1 | – | – | – | – | 2 | – | 9.6–12.4 | – | – | – | – | 2 | – |
| 11.9–13.5 | – | – | – | – | – | 2 | 12.8–14 | – | – | – | – | – | 2 |
| 380–430 | 2.9–3.6 | – | 1 | – | – | – | – | 2.8–3.7 | – | 1 | – | – | – | – |
| 3.1–3.9 | – | – | 1 | – | – | – | 2.9–3.9 | – | – | 1 | – | – | – |
| 3.7–4.5 | – | – | – | 1 | – | – | 3.3–4.5 | – | – | – | 1 | – | – |
| 4.5–6.1 | – | – | – | – | 1 | – | 3.9–5.2 | – | – | – | – | 1 | – |
| 4.5–6.1 | – | 2 | – | – | – | – | 4.5–7 | – | 2 | – | – | – | – |
| 5.4–6.9 | – | – | – | – | – | 1 | 4.9–6.1 | – | – | – | – | – | 1 |
| 5.7–7.3 | – | – | 2 | – | – | – | 6.1–8.7 | – | – | 2 | – | – | – |
| 6.9–8 | – | – | – | 2 | – | – | 7.5–11 | – | – | – | 2 | – | – |
| 8.5–10.1 | – | – | – | – | 2 | – | 8.4–12.2 | – | – | – | – | 2 | – |
| 10.9–12.5 | – | – | – | – | – | 2 | 12–14.5 | – | – | – | – | – | 2 |
| 430–460 | 2.7–3.1 | – | 1 | – | – | – | – | 2.2–3 | – | 1 | – | – | – | – |
| 2.7–3.9 | – | – | 1 | – | – | – | 2.9–3.7 | – | – | 1 | – | – | – |
| 3.7–4.7 | – | – | – | 1 | – | – | 3.3–4.5 | – | – | – | 1 | – | – |
| 4.1–4.9 | – | – | – | – | 1 | – | 3.7–4.9 | – | – | – | – | 1 | – |
| 4.3–6.1 | – | 2 | – | – | – | – | 4.3–6.3 | – | 2 | – | – | – | – |
| 5.3–5.7 | – | – | – | – | – | 1 | 4.9–5.7 | – | – | – | – | – | 1 |
| 5.9–8.3 | – | – | 2 | – | – | – | 5.9–8.3 | – | – | 2 | – | – | – |
| 7.1–8.5 | – | – | – | 2 | – | – | 7.5–10.5 | – | – | – | 2 | – | – |
| 8.3–9.5 | – | – | – | – | 2 | – | 8.5–11 | – | – | – | – | 2 | – |
| 10.1–11.5 | – | – | – | – | – | 2 | 10.5–12.5 | – | – | – | – | – | 2 |
| 460–480 | 2.5–2.9 | – | 1 | – | – | – | – | 2.8–3 | – | 1 | – | – | – | – |
| 2.8–3.8 | – | – | 1 | – | – | – | 2.9–3.7 | – | – | 1 | – | – | – |
| 3.6–4.4 | – | – | – | 1 | – | – | 3.4–4.1 | – | – | – | 1 | – | – |
| 3.8–4.8 | – | – | – | – | 1 | – | 3.7–4.5 | – | – | – | – | 1 | – |
| 4.1–5.7 | – | 2 | – | – | – | – | 4.1–6.1 | – | 2 | – | – | – | – |
| 5.3–7.7 | – | – | 2 | – | – | – | 4.7–5.5 | – | – | – | – | – | 1 |
| 5.4–5.6 | – | – | – | – | – | 1 | 5.5–7.5 | – | – | 2 | – | – | – |
| 6.8–8.9 | – | – | – | 2 | – | – | 7–9.5 | – | – | – | 2 | – | – |
| 7.2–9.6 | – | – | – | – | 2 | – | 9–10 | – | – | – | – | 2 | – |
| 9.8–11.4 | – | – | – | – | – | 2 | 11–12 | – | – | – | – | – | 2 |
Application for front panels without handles (Tip-On solution)
The fitting is suitable for use with front panels without handles with one or two push catches. |
| | |
|
Number of push catches |
X mm | | | For mounting in drilled hole | For screw fixing | | < 800 | 1 piece | 1 piece | | > 800 | 2 pieces | 2 pieces |
|
Position of the push catch |
| | |
| | |
Vertical installation
Flap height mm | Flap hinge | Concealed hinge |
|---|
Flap weight kg | Model* | Flap weight kg | Model* |
|---|
A | B | C | D | E | F | A | B | C | D | E | F |
|---|
* The specified number refers to the number of required flap stays with pull cable. |
|---|
| 200–230 | 2.5–2.9 | 1 | – | – | – | – | – | 2.6–3.1 | 1 | – | – | – | – | – |
| 4.1–5.9 | – | 1 | – | – | – | – | 4.4–5.5 | – | 1 | – | – | – | – |
| 5.3–7.3 | – | – | 1 | – | – | – | 6.3–8.5 | – | – | 1 | – | – | – |
| 8–11 | – | – | – | 1 | – | – | 7.5–9.3 | – | – | – | 1 | – | – |
| 230–270 | 2.2–2.5 | 1 | – | – | – | – | – | 2.1–2.5 | 1 | – | – | – | – | – |
| 3.3–4.8 | – | 1 | – | – | – | – | 3.4–4.5 | – | 1 | – | – | – | – |
| 4.1–4.8 | 2 | – | – | – | – | – | 4–4.8 | 2 | – | – | – | – | – |
| 4.2–6 | – | – | 1 | – | – | – | 4.5–5.6 | – | – | 1 | – | – | – |
| 6.6–8.6 | – | – | – | 1 | – | – | 6.8–8.6 | – | – | – | 1 | – | – |
| 6.8–9.6 | – | 2 | – | – | – | – | 6.8–9.2 | – | 2 | – | – | – | – |
| 9.6–12.8 | – | – | 2 | – | – | – | 9.2–12 | – | – | 2 | – | – | – |
| 270–330 | 1.9–2.3 | 1 | – | – | – | – | – | 2–2.3 | 1 | – | – | – | – | – |
| 3.2–4.5 | – | 1 | – | – | – | – | 3–4.9 | – | 1 | – | – | – | – |
| 3.4–4.3 | 2 | – | – | – | – | – | 3.5–4.5 | 2 | – | – | – | – | – |
| 3.8–5.1 | – | – | 1 | – | – | – | 3.7–5.1 | – | – | 1 | – | – | – |
| 5.7–7.3 | – | – | – | 1 | – | – | 5.4–7.1 | – | – | – | 1 | – | – |
| 6.1–8 | – | – | – | – | 1 | – | 6.1–7.3 | – | – | – | – | 1 | – |
| 6.3–8.1 | – | 2 | – | – | – | – | 6.1–7.7 | – | 2 | – | – | – | – |
| 7.9–11.1 | – | – | 2 | – | – | – | 7.7–10.1 | – | – | 2 | – | – | – |
| 11.3–14.5 | – | – | – | 2 | – | – | 10.5–13.7 | – | – | – | 2 | – | – |
| 12.9–15.5 | – | – | – | – | 2 | – | 12.1–14.5 | – | – | – | – | 2 | – |
| 330–380 | 2.6–3.4 | – | 1 | – | – | – | – | 2.5–3.6 | – | 1 | – | – | – | – |
| 3.3–4.5 | – | – | 1 | – | – | – | 3.2–4.3 | – | – | 1 | – | – | – |
| 4.9–6.3 | – | – | – | 1 | – | – | 4.6–6.1 | – | – | – | 1 | – | – |
| 5–6.5 | – | 2 | – | – | – | – | 4.9–6.4 | – | – | – | – | 1 | – |
| 5.3–6.5 | – | – | – | – | 1 | – | 5.1–6.9 | – | 2 | – | – | – | – |
| 6.7–7.3 | – | – | – | – | – | 1 | 6.3–7.3 | – | – | – | – | – | 1 |
| 7.3–8.5 | – | – | 2 | – | – | – | 6.6–9.3 | – | – | 2 | – | – | – |
| 9.7–11.7 | – | – | – | 2 | – | – | 9.1–11.3 | – | – | – | 2 | – | – |
| 10.7–12.9 | – | – | – | – | 2 | – | 10.5–12.9 | – | – | – | – | 2 | – |
| 13.3–14.9 | – | – | – | – | – | 2 | 12.5–14.5 | – | – | – | – | – | 2 |
| 380–430 | 2.5–3.4 | – | 1 | – | – | – | – | 2.3–3.2 | – | 1 | – | – | – | – |
| 3.2–4.2 | – | – | 1 | – | – | – | 3–4 | – | – | 1 | – | – | – |
| 4.4–5.4 | – | – | – | 1 | – | – | 4.4–5.4 | – | – | – | 1 | – | – |
| 4.8–5.6 | – | – | – | – | 1 | – | 4.4–6.6 | – | 2 | – | – | – | – |
| 5–6.2 | – | 2 | – | – | – | – | 4.6–5.6 | – | – | – | – | 1 | – |
| 5.9–6.6 | – | – | – | – | – | 1 | 5.5–6.4 | – | – | – | – | – | 1 |
| 6.2–8.2 | – | – | 2 | – | – | – | 6.6–8.2 | – | – | 2 | – | – | – |
| 8.6–10.6 | – | – | – | 2 | – | – | 8.4–10.2 | – | – | – | 2 | – | – |
| 9.8–11.4 | – | – | – | – | 2 | – | 9.4–11.4 | – | – | – | – | 2 | – |
| 11.8–13 | – | – | – | – | – | 2 | 11–3 | – | – | – | – | – | 2 |
| 430–460 | 2.3–3 | – | 1 | – | – | – | – | 2.3–3 | – | 1 | – | – | – | – |
| 3–3.8 | – | – | 1 | – | – | – | 2.8–3.6 | – | – | 1 | – | – | – |
| 4–5.2 | – | – | – | 1 | – | – | 4.2–5.2 | – | – | – | 1 | – | – |
| 4.6–5.4 | – | – | – | – | 1 | – | 4.2–6.2 | – | 2 | – | – | – | – |
| 4.6–6.2 | – | 2 | – | – | – | – | 4.4–5.4 | – | – | – | – | 1 | – |
| 5.6–6 | – | – | – | – | – | 1 | 5.2–6 | – | – | – | – | – | 1 |
| 6.2–7.8 | – | – | 2 | – | – | – | 5.4–7.6 | – | – | 2 | – | – | – |
| 7.8–10.2 | – | – | – | 2 | – | – | 7.4–9.4 | – | – | – | 2 | – | – |
| 9–10.4 | – | – | – | – | 2 | – | 8.4–10.6 | – | – | – | – | 2 | – |
| 11.4–12.2 | – | – | – | – | – | 2 | 10.6–12.2 | – | – | – | – | – | 2 |
| 460–480 | 2.4–3.2 | – | 1 | – | – | – | – | 2.3–3 | – | 1 | – | – | – | – |
| 2.8–4 | – | – | 1 | – | – | – | 2.8–3.6 | – | – | 1 | – | – | – |
| 3.8–5 | – | – | – | 1 | – | – | 4–5.2 | – | – | – | 1 | – | – |
| 4.5–5.4 | – | – | – | – | 1 | – | 4.2–6.2 | – | 2 | – | – | – | – |
| 4.6–6 | – | 2 | – | – | – | – | 4.4–5.4 | – | – | – | – | 1 | – |
| 5.4–6 | – | – | – | – | – | 1 | 5.2–6 | – | – | – | – | – | 1 |
| 5.6–7.8 | – | – | 2 | – | – | – | 5.4–7.6 | – | – | 2 | – | – | – |
| 7.6–10 | – | – | – | 2 | – | – | 7.2–9.4 | – | – | – | 2 | – | – |
| 8.8–10.4 | – | – | – | – | 2 | – | 8.4–10.6 | – | – | – | – | 2 | – |
| 10.8–11.6 | – | – | – | – | – | 2 | 10.4–11.6 | – | – | – | – | – | 2 |
Application for front panels without handles (Tip-On solution)
The fitting is suitable for use with front panels without handles with one or two push catches. |
| | |
|
Number of push catches |
X mm | | | For mounting in drilled hole | For screw fixing | | > 800 | 2 pieces | 2 pieces |
|
Position of the push catch |
| | |
| | |
Application for front panels without handlesThis fitting is suitable for use with handle-free front panels with one or two push catches. |
| | | |
| | Position of push catch |
| | | |
| X mm | | |
|---|
For mounting in drilled hole | For screw fixing |
|---|
| ≤ 800 | 1 piece | 1 piece | | > 800 | 2 pieces | 2 pieces |
| | |
| | | |
| | |
Application for front panels without handlesThis fitting is suitable for use with handle-free front panels with one or two push catches. |
| | | |
| | Position of push catch |
| | | |
| X mm | | |
|---|
For mounting in drilled hole | For screw fixing |
|---|
| ≤ 800 | 1 piece | 1 piece | | > 800 | 2 pieces | 2 pieces |
| | |
| | | |
| | |
