Fitting Set, for Door Straightening System, Planofit

For sliding doors –, White finish

407.90.709

Fitting Set, for Door Straightening System, Planofit
1 of 1
Note: The image may show a similar article

For sliding doors –, White finish

407.90.709

Art. no. 407.90.709
PCMin 1
Add to cart

Please select an article

See Required Products
Article details
  • Planofit adds rigidity to wooden sliding and hinged doors from 16 mm thick and prevents warping in either direction
  • Ideal for large, heavy doors
  • Can also be used to straight doors that have warped over a period of time
  • Normally two straightening fittings are recommended per door panel
  • 1. The threaded rod is inserted into the trim strip and 2 x U-washers and a hexagonal nut is attached to both sides of it
  • 2. The pre-mounted rod is then inserted into the groove
  • 3. The tensioners are inserted into the boss drilling job and fixed with screws
  • 4. Screw fix the retaining plates
  • 5. The door can now be aligned using the tensioners with an open ended SW10 wrench
  • 6. Position the cover caps on the tensioners

Installation

Clip fixing

Door thickness

Min. 16 mm

Material

Zinc alloy
Plastic
Product Features

Supplied with

Set consists of 2 x tensioners, 1 x hexagonal nut, 2 x securing washers, 1 x square nut, 2 x cover caps for tensioners, 4 x retaining plates

Order reference

Threaded rod and trim strip set to be ordered separately

Manuals and Videos
    15/12/2018

    Fitting Set, for Door Straightening System, Planofit

    For sliding doors – White finish

    Note: The image may show a similar article

    Note

    Please select an article via the features or article table in order to add it to the cart.