Ball bearing runners, for 1–3 extension leaves, for tables with and without frame

Synchronised action with continuous cord retainer –, installation length: 850 mm

Art. no. 642.59.912

  • Table with or without frame

    Table bases with and without frames are constructed and function in different ways.

    Table with frame = one-piece table base

    Table without frame = multi-piece table base

    The separable table tops are pushed apart. The table base remains unchanged.

    The separable table bases with fixed table top are pushed apart.

    Following applies for both tables with frame and without frame:

    Extension leaf

    Min. width 400 mm, Standard 500 mm, Comfort 600 mm, one extension leaf provides additional seating for 2 people.

    Synchronous

    Only one table side must be pulled out. The opposite side of the table is then extended automatically.

    Asynchronous

    Both table sides must be pulled out separately.

    Without locking mechanism

    For locking the pull out table fitting in extended position additional fittings are required (table top swivel bolts, locking hooks or spring clips).

    With locking mechanism

    The locking mechanism is integrated in the pull out table fitting. No further fittings are required.

  • Pull out table fittings for tables with frame

    Construction

    • One-piece table base
    • Separate table tops and extension leaves with table top connecting fittings and sleeves
    • Extension leaves can be fitted to the table frame with a folding fitting.

    Notes on construction

    • Pull out tables with closed frame can be equipped with a separated, hinged middle section (folding fitting) instead of an extension leaf.The folding fitting is required in addition to the pull out table fitting and must be ordered separately.

    Note on choice of pull out table fitting

    • Installation length L of pull out table fitting = approx. length of frame/base or approx. 2/3 of table Ø or table length without extension leaves

    ⓐ= width of extension leaf

    ⓛ= installation length of pull out table fitting

    ⓑ= total extension length of pull out table fitting

    ⓔ= opening for extension leaf

    Please note:

    If the installation length L is less than approx. length of frame/base or table Ø, this may lead to malfunction or sagging of the table top.

    Types of tables with frame

    open table frame

    Closedtable frame

    Separate extension leaf on end side

    front extension

    Front extension

    Separate extension leaf

    • Separate extension leaf (separate storage)

    Folding fitting

    • Separate extension leaf (integrated in table)
    • Folding fitting (integrated in table)
    • Open table frame
    • Folding fitting (integrated in table)
    • Folding fitting (integrated in table, "drawer function")
     
     

    Note: Folding fitting must be ordered separately in addition to the pull out table fitting.

  • Pull out table fittings for tables without frame

    Construction

    • Multi-piece table base, each fixed to one half of the table top.
    • Surrounding panel beneath table top stabilises the pull out table.

    Notes on construction

    • If the table legs are mounted inwards (with balance point on table top half), the pull out table fitting can be used without a central rod.
    • If table legs are mounted outwards, always select pull out table fitting with central rod.

    (1) central rod

     

    Note on choice of pull out table fitting

    • Installation length L of pull out table fitting = approx. length of frame/base or approx. 2/3 of table Ø or table length without extension leaves
    • A = width of extension leaf
    • L = installation length of pull out table fitting
    • B = total extension length of pull out table fitting
    • E = opening for extension leaf

    View of table from below, without extension leaf

    ⓐ Installation length of pull out table fitting is approx. length of frame

    Please note: If the installation length L is less than approx. length of frame/base or 2/3 of table Ø, this may lead to malfunction or sagging of the table top.

    Types of tables without frame

    open table frame

    Front extension

    • Separate extension leaf (separate storage)
    • Open table frame
    • Separate extension leaf (separate storage)

    Synchronised action with continuous cord retainer –, installation length: 850 mm

    Art. no. 642.59.912

    Art. no. 642.59.912
    Help

    Help

    Requested amount is in stock.
    Limited stock available.
    Item no longer available.

    Note:
    To receive items as fast as possible, choose 'When available' at checkout.

    GR Min. 1
    See Required Products
    Article details
    • Installation length 850 mm: For 2–4 people more at the table
    • Installation length 1,200 mm: For 2–6 people more at the table

    Material

    Steel

    Finish

    Galvanized

    Installation

    For screw fixing beneath table top
    Show more information
    Product Features

    Order reference

    The set does not include top connecting fittings and spring clips. Please order separately.

    23/07/2019

    Ball bearing runners, for 1–3 extension leaves, for tables with and without frame

    Synchronised action with continuous cord retainer – installation length: 850 mm

    • Support foot provided on site

    Note: The image may show a similar article

    Note

    Please select an article via the features or article table in order to add it to the cart.